Cheap price Analog Ics - TMS320F28034PNT Original Integrated Electronics/Component/Circuit In Stock IC Chip – Yingnuode
Cheap price Analog Ics - TMS320F28034PNT Original Integrated Electronics/Component/Circuit In Stock IC Chip – Yingnuode Detail:
The LP8861-Q1 has an option to drive an external pFET to disconnect the input supply from the system in the event of a fault and reduce inrush current and standby power consumption. The device can reduce
LED current based on temperature measured with external NTC sensor to protect LED from overheating and extend LED lifetime.
The input voltage range for the LP8861-Q1 is from 4.5 V to 40 V to support automotive stop/start and load dump condition. The LP8861-Q1 integrates extensive fault detection and protection features.
Product Attributes
TYPE |
DESCRIPTION |
Category |
Integrated Circuits (ICs) PMIC – LED Drivers |
Mfr |
Texas Instruments |
Series |
Automotive, AEC-Q100 |
Package |
Tape & Reel (TR) Cut Tape (CT) Digi-Reel® |
Part Status |
Active |
Type |
DC DC Regulator |
Topology |
SEPIC, Step-Up (Boost) |
Internal Switch(s) |
Yes |
Number of Outputs |
4 |
Voltage – Supply (Min) |
4.5V |
Voltage – Supply (Max) |
40V |
Voltage – Output |
45V |
Current – Output / Channel |
100mA |
Frequency |
300kHz ~ 2.2MHz |
Dimming |
PWM |
Applications |
Automotive, Backlight |
Operating Temperature |
-40°C ~ 125°C (TA) |
Mounting Type |
Surface Mount |
Package / Case |
20-PowerTSSOP (0.173″, 4.40mm Width) |
Supplier Device Package |
20-HTSSOP |
Base Product Number |
LP8861 |
LED Driver
What is an LED Driver?
An LED driver is a power-adjusted electronic device that drives the normal operation of an LED light or LED module assembly. Due to the conduction characteristics of the LED PN junction, it can adapt to the voltage and current variations of the power supply is very narrow, a slight deviation may not be able to light the LED or light efficiency is seriously reduced, or shorten the life of the chip or even burned. Current industrial power supplies and common battery power supplies are not suitable for direct supply to LEDs, and the LED driver is the electronic component that can drive the LED to operate at the optimum voltage or current.
Applications
Applications of LED Drivers.
As LEDs are used in almost every area of electronics applications, with almost unpredictable variations in luminous intensity, light color, and on/off control, LED drivers have become almost one-to-one servo devices, making for a diverse family of devices. The simplest LED driver (if you can call it that) is probably one or several series-parallel resistive components in a circuit that divides the current and voltage, and it is not a stand-alone product at all. For more general commercial applications that require a stable constant current and voltage output, a range of system solutions with precise power conditioning capabilities has been developed. The realization of these solutions often requires a more complex circuit design, the core of which is the integrated application of LED driver ICs. By setting up different support circuits at the periphery of the LED driver ICs, solutions can be built for different LED applications, from small mobile phone display backlighting and keypad lighting drivers to high-power LED street lighting and large outdoor LED displays.
The design and supply of more generic high-power LED drivers are generally undertaken by specialist companies. These companies package them into modules and then supply them to manufacturers of LED end-use products. The unique importance of LED drivers in LED applications and the wide range of user requirements make the LED driver IC, the heart of the LED driver, a key element in the entire technology chain. The driver is the core component of LED lighting. With the maturity of LED chip technology, the quality of LED light sources has become so reliable that in many cases the failure of LED luminaires comes from the driver.
Description
The LP8861-Q1 is an automotive high-efficiency, low-EMI, easy-to-use LED driver with integrated boost/SEPIC converter. It has four high-precision current sinks that can provide high dimming ratio brightness control with a PWM input signal.
The boost/SEPIC converter has adaptive output voltage control based on the LED current sink headroom voltages. This feature minimizes the power consumption by adjusting the voltage to lowest sufficient level in all conditions. The boost/SEPIC converter supports spread spectrum for switching frequency and an external synchronization with dedicated pin. A wide-range adjustable frequency allows the LP8861-Q1 to avoid disturbance for AM radio band.
The LP8861-Q1 has an option to drive an external p-FET to disconnect the input supply from the system in the event of a fault and reduce inrush current and standby power consumption. The device can reduce LED current based on temperature measured with external NTC sensor to protect LED from overheating and extend LED lifetime.
The input voltage range for the LP8861-Q1 is from 4.5 V to 40 V to support automotive stop/start and load dump condition. The LP8861-Q1 integrates extensive fault detection and protection features.
Product detail pictures:
Related Product Guide:
Fast and fantastic quotations, informed advisers to help you choose the correct products that suits all your needs, a short manufacturing time, responsible good quality control and distinct companies for paying and shipping affairs for Cheap price Analog Ics - TMS320F28034PNT Original Integrated Electronics/Component/Circuit In Stock IC Chip – Yingnuode , The product will supply to all over the world, such as: Accra, Finland, Zurich, We take measure at any price to attain essentially the most up-to-date gear and procedures. The packing of nominated brand is our a further distinguishing feature. The solutions to assure years of trouble-free service has attracted a great deal customers. The goods are obtainable in improved designs and richer variety, they're produced scientifically of purely raw supplies. It accessible in a variety of designs and specifications for the selection. The newest forms are much far better than the previous one and they're extremely popular with several clients.
By Elsa from Ecuador - 2018.06.09 12:42
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Audrey from Johor - 2017.06.29 18:55