-
XC7VX690T-2FFG1761I FPGA – Field Programmable Gate Array 10GPON/10GEPON OLT Line Card
XC7VX690T-2FFG1761I Virtex®-7 Field Programmable Gate Arrays are devices enabled by stacked silicon interconnect (SSI) technology to address system requirements for applications. FPGAs are semiconductor devices that are based around a matrix of configurable logic blocks (CLBs) connected via programmable interconnects.
-
XC7VX690T-2FFG1927I new and original with own stock FPGA
XC7VX690T-2FFG19271 FPGA, Virtex-7, MMCM, PLL, 600 I/O’s, 710 MHz,693120 Cells, 970 mV to 1.03 V, FCBGA-1927
-
10AX115H2F34E2SG FPGA Arria® 10 GX Family 1150000 Cells 20nm Technology 0.9V 1152-Pin FC-FBGA
10AX115H2F34E2SG device family consists of high-performance and power-efficient 20 nm mid-range FPGAs and SoCs.
Higher performance than the previous generation of mid-range and high-end
FPGAs -
XCVU9P-2FLGB2104I FPGA,VIRTEX ULTRASCALE,FCBGA-2104
XCVU9P-2FLGB2104I architecture comprises high-performance FPGA, MPSoC, and RFSoC families that address a vast spectrum of system requirements with a focus on lowering total power consumption through numerous innovative technological advancements.
-
Original IC XCKU025-1FFVA1156I Chip Integrated Circuit IC FPGA 312 I/O 1156FCBGA
Kintex® UltraScale™ Field Programmable Gate Array (FPGA) IC 312 13004800 318150 1156-BBGA、FCBGA
-
XC7VX485T-2FFG1761I Virtex®-7 T and XT FPGAs are available in -3, -2, -1, and -2L speed grades RoHS Compliant
Virtex®-7 T and XT FPGAs are available in -3, -2, -1, and-2L speed grades, with -3 having the highest performance.The -2L devices operate at VCCINT = 1.0V and are screened for lower maximum static power. The speed specification of a -2L device is the same as the -2 speed grade. The -2G speed grade is available in devices utilizing Stacked Silicon Interconnect (SSI) technology. The -2G speed grade supports 12.5 Gb/s GTX or 13.1 Gb/s GTH transceivers as well as the standard -2 speed grade specifications.
-
ADIS16507-2BMLZ precision, miniature microelectromechanical system (MEMS) inertial measurement unit (IMU)
ADIS16507 is a precision, miniature microelectromechanical system (MEMS) inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. It is widely used in application such as navigation, stabilization, and instrumentation, unmanned and autonomous vehicles, smart agriculture and construction machinery, factory/industrial automation, robotics, virtual/augmented reality, internet of moving things etc.
-
AD9552BCPZ-REEL7 Clock Generators and Synthesizers own stock
AD9552BCPZ-REEL7 Clock Generators and Synthesizers Clock Generator 6.6MHz to 112.5MHz-IN 900MHz-OUT 32-Pin LFCSP EP T/R
-
XC7A100T-2FGG676C – Integrated Circuits, Embedded, Field Programmable Gate Arrays
Artix®-7 FPGAs are available in -3, -2, -1, -1LI, and -2L speed grades, with -3 having the highest performance. The Artix-7 FPGAs predominantly operate at a 1.0V core voltage. The -1LI and -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than the -1 and -2 devices, respectively. The -1LI devices operate only at VCCINT = VCCBRAM = 0.95V and have the same speed specifications as the -1 speed grade. The -2L devices can operate at either of two VCCINT voltages, 0.9V and 1.0V and are screened for lower maximum static power. When operated at VCCINT = 1.0V, the speed specification of a -2L device is the same as the -2 speed grade. When operated at VCCINT = 0.9V, the -2L static and dynamic power is reduced.
-
XC7K420T-2FFG901I – Integrated Circuits, Embedded, Field Programmable Gate Arrays
Kintex®-7 FPGAs are available in -3, -2, -1, -1L, and -2L speed grades, with -3 having the highest performance. The -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than the -2 devices. The -2L industrial (I) temperature devices operate only at VCCINT = 0.95V. The -2L extended (E) temperature devices can operate at either VCCINT = 0.9V or 1.0V. The -2LE devices when operated at VCCINT = 1.0V, and the -2LI devices when operated at VCCINT = 0.95V, have the same speed specifications as the -2 speed grade, except where noted. When the -2LE devices are operated at VCCINT = 0.9V, the speed specifications, static power, and dynamic power are reduced. The -1L military (M) temperature devices have the same speed specifications as the -1 military temperature devices and are screened for lower maximum static power.
-
XC7Z015-2CLG485I – Integrated Circuits (ICs), Embedded, System On Chip (SoC)
The Zynq®-7000 SoCs are available in -3, -2, -1, and -1LI speed grades, with -3 having the highest performance. The -1LI devices can operate at either of two programmable logic (PL) VCCINT/VCCBRAM voltages, 0.95V and 1.0V, and are screened for lower maximum static power. The speed specification of a -1LI device is the same as the -1 speed grade. When operated at PL VCCINT/VCCBRAM = 0.95V, the -1LI static and dynamic power is reduced. Zynq-7000 device DC and AC characteristics are specified in commercial, extended, industrial and expanded (Q-temp) temperature ranges. Except for the operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed grade industrial device are the same as for a -1 speed grade commercial device). However, only selected speed grades and/or devices are available in the commercial, extended, industrial, or Q-temp temperature ranges. All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications.
-
XC7Z030-2FFG676I – Integrated Circuits (ICs), Embedded, System On Chip (SoC)
Application Processor Unit (APU) • 2.5 DMIPS/MHz per CPU • CPU frequency: Up to 1 GHz • Coherent multiprocessor support • ARMv7-A architecture • TrustZone® security • Thumb®-2 instruction set • Jazelle® RCT execution Environment Architecture • NEON™ media-processing engine • Single and double precision Vector Floating Point Unit (VFPU) • CoreSight™ and Program Trace Macrocell (PTM) • Timer and Interrupts • Three watchdog timers • One global timer • Two triple-timer counters.
