TCAN1051VDRQ1 New original one-stop purchase and distribution list Electronic Component IC TCAN1051VDRQ1

short description:

This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per second). Devices with part numbers that include the “G” suffix are designed for data rates up to 5 Mbps, and versions with the “V” have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family of devices comes with silent mode which is also commonly referred to as listen-only mode. Additionally, all devices include many protection features to enhance device and network robustness.

Send email to us Download Datesheet

Product Detail

Product Tags

Product Attributes

TYPE	DESCRIPTION	SELECT
Category	Integrated Circuits (ICs) Interface - Drivers, Receivers, Transceivers
Mfr	Texas Instruments
Series	Automotive, AEC-Q100
Package	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®
Product Status	Active
Type	Transceiver
Protocol	CANbus
Number of Drivers/Receivers	1/1
Duplex	Half
Receiver Hysteresis	120 mV
Data Rate	2Mbps
Voltage - Supply	4.5V ~ 5.5V
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SOIC
Base Product Number	TCAN1051
SPQ	2500/PCS

Interface

Interface is a keyword for interface operations in object-oriented programming languages, and the function is to combine the required members to encapsulate a collection of certain functions. It is like a template in which the members of an object must be implemented are defined, implemented through classes or structs. Interfaces cannot be instantiated directly, i.e. ICount ic=new iCount() is wrong. An interface cannot contain any code for members, only the members themselves. The concrete code for the interface members is provided by the class that implements the interface. The interface is declared using the interface keyword.

Transceiver

A transceiver is a device made up of both a receiver and transmitter (the name “transceiver” is actually short for transmitter-receiver) and these two gadgets are in a single module. When no circuitry is common between transmit and receive functions, the device is a transmitter-receiver.

Transceivers can be found in radio technology, telephony as well as Ethernet in which transceivers are called Medium Attachment Units (MAUs) in IEEE 802.3 documents and were widely used in 10BASE2 and 10BASE5 Ethernet networks. Fiber-optic gigabit, 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet utilize transceivers known as GBIC, SFP, SFP+, QSFP, XFP, XAUI, CXP, and CFP, among which Cisco SFP is the most popular one. In addition, 1000BASE-T SFP, 10GBASE-T SFP+ and 1000BASE-T copper SFP we mentioned before are all transceivers.

Features for the TCAN1051V-Q1

AEC Q100: Qualified for automotive applicationsMeets the ISO 11898-2:2016 and ISO 11898-5:2007 physical layer standards
- Temperature grade 1: -40°C to 125°C, T_A
- HBM classification level: ±16 kV
- CDM classification level ±1500 V
Functional Safety-Capable
- Documentation available to aid functional safety system design
’Turbo’ CAN:EMC performance: supports SAE J2962-2 and IEC 62228-3 (up to 500 kbps) without common mode choke
- All devices support classic CAN and 2 Mbps CAN FD (flexible data rate) and "G" options support 5 Mbps
- Short and symmetrical propagation delay times and fast loop times for enhanced timing margin
- Higher data rates in loaded CAN networks
I/O Voltage range supports 3.3 V and 5 V MCUs
Ideal passive behavior when unpowered
- Bus and logic terminals are high impedance (no load)
- Power up/down with glitch free operation on bus and RXD output
Protection featuresReceiver common mode input voltage: ±30 V
- IEC ESD protection up to ±15 kV
- Bus Fault protection: ±58 V (non-H variants) and ±70 V (H variants)
- Undervoltage protection on V_CC and V_IO (V variants only) supply terminals
- Driver dominant time out (TXD DTO) - Data rates down to 10 kbps
- Thermal shutdown protection (TSD)
Typical loop delay: 110 ns
Junction temperatures from –55°C to 150°C
Available in SOIC(8) package and leadless VSON(8) Package (3.0 mm x 3.0 mm) with improved automated optical inspection (AOI) capability

Description for the TCAN1051V-Q1

This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per second). Devices with part numbers that include the "G" suffix are designed for data rates up to 5 Mbps, and versions with the "V" have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family of devices comes with silent mode which is also commonly referred to as listen-only mode. Additionally, all devices include many protection features to enhance device and network robustness.

Previous: TPS74801DRCR (Hot offer) New TPS74801DRCR in stock

Next: LP87524JRNFRQ1 ( Electronic Components IC Chips Integrated Circuits IC ) LP87524JRNFRQ1

Write your message here and send it to us