order_bg

products

TMS320F28069PZPS Good Price IC Chip Original Electronic Components Integrated Circuit In Stock

short description:

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.
The F2803x family of microcontrollers provides the power of the C28x core and Control Law Accelerator (CLA) coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.


Product Detail

Product Tags

An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

Product Attributes

TYPE

DESCRIPTION

Category

Integrated Circuits (ICs)

Embedded - Microcontrollers

Mfr

Texas Instruments

Series

C2000™ C28x Piccolo™

Package

Tray

Part Status

Active

Core Processor

C28x

Core Size

32-Bit Single-Core

Speed

90MHz

Connectivity

CANbus, I²C, McBSP, SCI, SPI, UART/USART

Peripherals

Brown-out Detect/Reset, DMA, POR, PWM, WDT

Number of I/O

54

Program Memory Size

256KB (128K x 16)

Program Memory Type

FLASH

EEPROM Size

-

RAM Size

50K x 16

Voltage - Supply (Vcc/Vdd)

1.71V ~ 1.995V

Data Converters

A/D 16x12b

Oscillator Type

Internal

Operating Temperature

-40°C ~ 125°C (TA)

Mounting Type

Surface Mount

Package / Case

100-TQFP Exposed Pad

Supplier Device Package

100-HTQFP (14x14)

Base Product Number

TMS320

Definition

An MCU is a complete computer system integrated on a chip, also known as a monolithic microcontroller. Microcontrollers are typically embedded microcontrollers, which are program dependent and modified. Different programs are used to achieve different functions, some for achieving special and unique ones. Compare with other devices that are difficult to achieve even with a lot of effort, MUC has its advantages.

Classification

Microcontrollers can be classified in different ways.
(a) 8-bit, 16-bit, and 32-bit machines according to data bus width.
(b) They can be classified according to memory architecture as Harvard architecture and Von Neumann architecture.
(c)According to the type of embedded program memory they can be classified as OTP, Mask, EPROM/EEPROM, and Flash memory Flash.
(d)According to the instruction structure they can be divided into CISC (Complex Instruction Set Computer) and RISC (Reduced Instruction Set Computer)
According to the role played by the MCU in its work, there are mainly the following types of microcontrollers.

Functions

In industrial applications, the role of the microcontroller is to control and coordinate the activities of the entire device, which usually requires a program counter (PC), an instruction register (IR), an instruction decoder (ID), timing and control circuits, as well as pulse sources and interrupts.

Conponent Parts

Although most of the functions of a microcontroller are integrated on a small chip, it has most of the components needed for a complete computer: CPU, memory, internal and external bus system, and nowadays most will also have external memory. It also integrates peripheral devices such as communication interfaces, timers, real-time clocks, and so on. The most powerful microcontroller systems today can even integrate sound, graphics, networking, and complex input and output systems on a single chip.

Features

The MCU is suitable for processing diagnostics and arithmetic for a wide range of data from different information sources, focusing on control. It is small, light, inexpensive, and provides convenient conditions for learning, application, and development.
MCU is an online real-time control computer, online is the field control, need is to have the strong anti-interference ability, lower cost, this is also an offline computer's (such as home PC) the main difference.
At the same time, the most important feature that distinguishes the MCU from the DSP is its versatility, which is reflected in the instruction set and addressing modes.

About the Products

C2000™ microcontrollers are built for real-time control.  We provide low-latency real-time control for every performance level and price point across different applications.  You can pair C2000 real-time MCUs with gallium nitride (GaN) ICs and silicon carbide (SiC) power devices to help you achieve their full capabilities. This pairing can help you overcome design challenges like high switching frequencies, high power density and more. C2000™.
C2000™ MCUs TMS320F28X Microcontrollers for every design need: General purpose, Real-time control, Industrial sensing, Industrialcommunications, Automotive-qualified, High performance.


  • Previous:
  • Next:

  • Write your message here and send it to us